Qingzhou Tonghui Environmental Protection Machinery Equipment Co., Ltd.

/3/3 Drum type sand and gravel separator 3 /> Qingzhou Tonghui Mechanical Equipment Co., Ltd. provides you with drum type sand and gravel separator/mixing station without foundation mortar separation equipment. The series of concrete cleaning drum separators combine stone and sand separation into a separation system. There are spiral blades inside and outside the drum screen. It adopts the principle of a bucket wheel machine. The bucket on the grinding wheel discharges the sand from the sand outlet. The digging wheel on the stone outlet wheel discharges the sand. The bucket discharges the stones from the stone outlet.
The sand and gravel separator is the core equipment of the concrete recycling system. It is mainly used to clean, separate and recycle the sewage from the tank truck and the sand and gravel in the residual concrete. When the tanker stops at the set position, the system will automatically add water, automatically flush, and automatically send the sewage and concrete waste in the chute to the sand and gravel separation system for processing. The entire flushing process is fully automated. Send the separated sand and gravel to the sand outlet and stone outlet respectively. The overflowed water flows to the sedimentation tank through the drainage ditch. After passing through the three-stage sedimentation, it is pumped back by the water pump and recycled. The whole cleaning process of the mixer truck takes about five minutes. In addition, models of different specifications can be manufactured according to customer needs.
3/3 Fujian/>The concrete sand and gravel separator of the mixing station is also called the concrete sand and gravel separator or the concrete sand and gravel separation slurry water recovery equipment. It is the core equipment of the concrete recycling system and is mainly used to clean the sewage from tank trucks. and cleaning, separation and recycling of sand and gravel in residual concrete. The design of the concrete sand and gravel separator in the mixing station adopts foreign advanced concrete recycling technology, which can save a lot of manpower, material resources and financial resources. It can effectively solve the concrete pollution problem and save valuable construction resources in an economical and reasonable manner. It is an indispensable supporting recycling equipment for concrete mixing stations. The concrete sand and gravel separator separation system of the mixing station is equipped with an automatic stone sweeping mechanism and the most advanced photoelectric automation control system. This machine is mainly used for cleaning the mixer truck of the concrete mixing station and for the separation and recovery of remaining waste concrete, sand and water. Utilization, the use of this device can solve the problem of waste concrete pollution and save resources. It can not only automatically separate and clean the sand, stone, and slurry in the waste concrete in the mixer truck at one time, but also ensure the reuse of the sand, stone, and water. The sewage will pass through the slurry recovery equipment, and then be pumped into the machine for recycling after sedimentation. , achieving zero discharge of sewage, saving resources and protecting the environment. In a true sense, the machine reflects the characteristics of reasonable design, easy maintenance and use, low power consumption, and high return on investment. It is an ideal environmentally friendly and energy-saving mixing station. product.
The concrete sand and gravel separator of the mixing station has a compact structure and simple operation. It can provide one or two trucks for simultaneous unloading and cleaning as needed.
Advantages
There is almost no need for a ramp, the car wash water is recycled and sewage is discharged to zero.
, Large-volume machine body design, good settling effect, less overflow sand:
Innovative diversion drum screen, not easy to block when processing large quantities:
, Axle heads at both ends of the drum Above the water level, it is not easy to be damaged
The application of bucket-type discharge port enables friction-free operation and reduces the demand for energy consumers
/3/3 Dongying installation site copy/>The drum sand and gravel separator will be divided into The stone and sand separation system are combined into a separation system. There are spiral blades inside and outside the trommel screen. It adopts the principle of a bucket wheel machine. The bucket on the outlet wheel discharges the sand from the sand outlet, and the bucket on the initial outlet wheel discharges the stones from the stone outlet. . The system can be flexibly arranged according to site conditions and customer requirements. It adopts a fully automatic control system, which is unattended and easy to operate. It can be adjusted and controlled at any time according to the user's usage habits and seasons.
Features of the drum type sand and gravel separator:
. Almost no need for a slope table
. Large-volume body design, good settling effect, less overflow sand
3. Innovative diversion type The drum screen is not easy to block when processing large quantities
. The shaft heads at both ends of the drum are above the water level and are not easily damaged
. The application of bucket-type discharge ports enables friction-free operation and reduces energy consumption.
Qingzhou Tonghui Environmental Protection Machinery Equipment Co., Ltd. specializes in the production of customized sand and gravel separators, sea sand desalination equipment, sewage treatment equipment, sand washing machines, stone washing machines, mortar tanks, engineering car wash tables and other engineering machinery and equipment. Our company has always adhered to the tenet of honesty, quality assurance and customer first to serve you wholeheartedly. Contact number: